EA Kits - Redarc Tow Controller & Installation Loom Kit - Mitsubishi Pajero Sport/MQ MR Triton
EA Kits Redarc Tow Controller Kits supply everything required to DIY or have Professionally installed a Redarc Tow Controller to your vehicle. This kit allows your vehicle to work with and support trailers with electronic brakes.
Our model specific kits for Mitsubishi Pajero Sport / MQ MR Triton also include Redarc EBRH-ACCV3 12V TowPro Elite, Pajero Sport Redarc Dash Adapter to fit the Redarc Remote Head, 2m of conduit and 25a red wire for battery lead extension, terminals and heat shrink for battery & fuse joints, 40a resetable circuit breaker, Redarc wiring loom including diode for new model backfeed requirements, single type battery top mounting plate and hardware for securing.
**NOTE LAST PICTURE SHOWS DUAL MIDI FUSE KIT. THIS IS NOT NORMALLY SUPPLIED. IMAGE FOR MOUNTING LOCATION PURPOSE ONLY. RESTABLE CIRCUIT BREAKER SINGLE KIT ONLY INCLUDED. MIDI FUSE KIT CAN BE SUPPLIED AT EXTRA COST, IF REQUIRED TO SUIT APPLICTION.
REDARC continues to set the benchmark in trailer brake control technology which has seen the Tow-Pro Elite remain Australia’s favourite and most trusted brake controller for 12v and 24v vehicles. For a 12v only brake controller, don't go passed the Tow-Pro Elite 12, offering all of the market leading features and award winning control you need to tow your caravan, camper trailer or trailer.
The Tow-Pro Elite provides users with the ability to swap between proportional mode (inertia sensing) for highway driving conditions and user-controlled mode, popular for off-road driving. This is the 3rd generation of REDARC’s Tow-Pro brake controller with the original released in June 2014 and the acclaimed Tow-Pro Elite released in September 2015.
Continual software upgrades have been included in the Tow-Pro Elite which result in smoother braking for motorists towing the widest range of caravans, trailers, boat trailers and horse floats. When used with the recommended REDARC wiring kits, the Tow-Pro Elite ensures compatibility with all new vehicle technology and features active calibration.
It works in 12V vehicles with electric or electric/hydraulic trailer brakes and it works in 24V vehicles with electric brakes without the need for any additional adaptors. For electric/hydraulic brakes behind 24V vehicles, it requires the EB24A adaptor. When installed as per instructions It ensures an ADR approved installation.
It has also been approved by AL-KO for use with their ESC and by Dexter with their DSC systems.
Some wiring, specific tools and 12v electrical knowledge required for DIY install.
Professional fitting available at extra cost.
Dual style MIDI Fuse or Circuit Breaker battery top mount brackets over the standard single type can be supplied if you have an Anderson Plug also required at your tow bar.
Postage available Aus Wide for $25 - Customer to specify during order